1U Compact Rectifier Power Telecom DC48V Power Distribution System for Critical Infrastructure
Product Overview of 1U Compact Telecom DC48V Power Distribution System
ESTEL's ET4860-M3H21 is a 1U-high, 19-inch sub-rack power system engineered for bandwidth-critical applications like fiber optics, microwave backhaul, and access switching. Unlike conventional rectifier shelves, this unit accepts direct high-voltage photovoltaic input up to 63A/2P, eliminating the need for separate solar converters. Front-access terminals for both AC input and DC output allow installation against a wall or back-to-back with other equipment.
Despite its slim 1U profile, the system delivers 6kW at -53.5VDC using two hot-swappable 3kW rectifier modules in N+1 configuration. A single 100A/1PN breaker handles battery connection, while four 63A/1PN BLVD circuits feed critical loads directly — no LLVD shedding, no compromise. The system operates from 45Hz to 66Hz, ready for either 50Hz or 60Hz grids.
Controller of 1U Compact Telecom DC48V Power Distribution System
At the heart of this system is the MC2600 controller. Built around an ARM Cortex-M4 processor, the MC2600 brings enterprise-grade hybrid power management to compact form factors. It handles diesel generators, VRLA, lithium batteries, and solar modules from a single interface. Key capabilities include programmable battery testing (scheduled, constant-current, or short-duration), one-click configuration upload for rapid site deployment, and an energy-saving standby mode that cuts rectifier idle losses. The controller scales from 1 to 40 rectifiers, making it equally suited for standalone cabinets and centralized power plants.
Key Features of 1U Compact Telecom DC48V Power Distribution System
High-voltage PV direct input – 63A/2P breaker accepts solar feed without external conversion
1U, 6kW density – Fits where traditional 2U or 3U systems cannot
Front-access everything – Terminals on the front panel; zero rear clearance required
BLVD-only design – Four 63A circuits, no automatic shedding, every load stays critical
Single battery breaker – 100A/1PN, clean and simple for single-string backup
Rectifier Module of 1U Compact Telecom DC48V Power Distribution System
|
Rectifier
|
Input voltage |
85VAC～300VAC, rated 220VAC |
| Efficiency |
>96% |
| Rated power |
3000W(176~300VAC) |
| Working temperature |
-40℃~+75℃(fully output below 50℃) |
| Dimension |
106.5mm(W)×286mm(D)×41.5mm(1U/H) |
| Weight |
≤2kg |
| Cooling mode |
Forced cooling |
| Power factor |
≥0.99 |
| THD |
≤5% |
| DC output |
–43 ~ –58VDC, rated –53.5VDC, maximum 55A |
System of 1U Compact Telecom DC48V Power Distribution System
-
Dimension: 482.0(W) × 350.0(D) × 1U(H)
-
Weight: ≤10kg (without rectifiers)
-
Cooling mode: Natural cooling
-
Installation mode: Installed on 19-inch rack or inside the cabinet
-
Cabling mode: Top inlet and top outlet
-
Maintenance mode: Front maintenance, support module grade change
-
Protection level: IP20
Input of 1U Compact Telecom DC48V Power Distribution System
DC Distribution of 1U Compact Telecom DC48V Power Distribution System
-
Output voltage: –43 ~ –58VDC, rated value: –53.5VDC
-
Maximum capacity:6kW(2*3kw, N+1 redundancy)
-
Battery breakers: 1*100A/1PN
-
Load breakers: BLVD: 4*63A/1PN
Product Tags:
|
|
1U Compact Rectifier Power Telecom DC48V Power Distribution System for Critical Infrastructure Images
|
